Barbed Hose Reducer 3/4" to 1/2"

Use to connect 3/4" tubing to 1/2" tubing.

Basket Dripper Stakes

Basket Dripper Stakes are 7 1/4” in length with a 1/8” inlet to fit most drip lines and efficiently direct water where plants need it most: at the root zone. Stake-style drippers are...

Double Barbed 1/4" Elbow - 10 pack

This 1/4" Double Barbed Elbow is for use with a 1/4" hose only and for water pressure up to 50 PSI. Pack of 10.

Double Barbed 1/4" Straight Connector - 10 pack

This 1/4" Double Barbed Straight Connector is for use with a 1/4" hose only and for water pressure up to 50 PSI. Pack of 10.

Double Barbed 1/4" Tee - 10 pack

This 1/4" Double Barbed Tee is for use with a 1/4" hose only and for water pressure up to 50 PSI. Pack of 10.

Drippers 1/2 GPH Pressure Compensating 10 pack

For landscape and container plants. Maintains a constant 0.5 GPH flow rate even on hillsides or long circuits. Pack of 10.

Hole Punch

The Hole Punch is designed for comfortable use. Punches holes in 1/2", 5/8" or .710" hose to insert PC drippers or 1/4" fittings. Handle has socket for installing and removing Micro Spray Jets. Card...

Hose End Clamp 1/2"

The 1/2" Tube End Clamp closes off the ends of the 1/2" poly hose and is easy to remove.

Poly Tubing 1/2" x 100' roll

Gardeners can use Raindrip 1/2" Poly Drip Hose as a complete circuit by itself or as a feeder line from the main line. Tubing is black and one-half-inch in diameter. 100-foot coil.

RD 1/2" Barbed Straights 5 Pack

The 1/2" Double Barbed Connector is for use with a 1/2" hose only and for water pressure up to 30 PSI.

RD 1/4" Stakes 100/pk

4" Support Stakes for 1/4" tubing. Use to hold tubing with drippers in position next to the plants to be watered.

RD Adjustable Full Circle 5/pk

Uniformly sprays water over a full circle with an adjustable diameter of up to 15'. Sprinkler inlet: 10-32 NFT.

Support Stakes 4" - 10pk

The 4" Support Stakes hold 1/4" tubing in place next to plants. Package of 10 stakes.