The EZ-Clone 360 degree Mister is a replacement spray head for all EZ-Clone systems.
Our new Spin Tight Bulkheads now come standard on all 8 & 13 gallon Under Current systems to improve ease of use and increase the longevity of the growth mods by reducing the stresses incurred on the plastic. These extremely useful bulkheads can be...
Aero-Rooter 2" x 0.75" Neoprene Disks - Works great for both Aeroponics and Hydroponics. Each disk has an opening in the side so that it can be used to hold a plant cutting. These disks are a perfect replacement for the disks in most cloners.
Aero-Rooter 3" Neoprene Disks - Works great for both Aeroponics and Hydroponics. Each disk has an opening in the side and a small hole in the middler.
Basket Dripper Stakes are 7 1/4” in length with a 1/8” inlet to fit most drip lines and efficiently direct water where plants need it most: at the root zone. Stake-style drippers are fit for soil and hydroponic growing methods.
These Grommets by C.A.P. can be used to replace old, worn grommets in your hydroponic systems and are essential components when making your own hydroponic system. They will fit the 1/2'' barbed fittings and 13/16'' to 7/8'' hole size for a snug fit...
AeroFlo 3" Site Plug for General Hydroponics Systems.
The Raindrip 1/2" Compression Hose End Plug with 3/4" Cap closes the ends of one-half-inch poly hose when frequent flushing is necessary. May be used with water pressure up to 60 PSI. One end closure with lid per package.
The 3/4" Hose Thread Swivel x 1/2" Compression Adaptor is for use with a 1/2" hose only. It connects a 1/2" poly hose to faucet or other 3/4" male hose thread. Includes filter washer.
This Botanicare Bulk Head Kit contains two Barbed Ebb & Flow Bulkhead Fittings (one 1/2" and one 3/4"), two Extensions, and two Screens.
The WaterFarm Plumbing Kit includes the essential pieces that are need to make your own WaterFarm type hydroponics system. It comes with the following items: * Pumping column * Column support tube * Air tube * Drip ring * 1/2" grommet * Drain level...
The 4" Support Stakes hold 1/4" tubing in place next to plants. Package of 10 stakes.
These Grommets by Hydrofarm. can be used to replace old, worn grommets in your hydroponic systems and are essential components when making your own hydroponic system. Contains 1 grommet.
This 1/4" Double Barbed Tee is for use with a 1/4" hose only and for water pressure up to 50 PSI. Pack of 10.
This Bulk Head Extension from Botanicare is great for do-it-yourselfers. For use with Botanicare Barbed Ebb & Flow Bulkhead Fittings. Price is for one Bulk Head Extension piece. (Bulk Head Extension is shown in the picture as the item on the far...
High-quality 1/4" black Poly Tubing for various applications. 50 feet per roll. -Premium Grade Drip Watering Tubing -Flexible in cool temperatures -Strong in the hot sun -Can be left out year round, buried, on the surface in any weather. -No cracking or...
This Wrench works with Under Current Spin Tight Bulkheads, both 2" and 3" models.
Hole Plugs are double-ended, double-duty plugs that seal either large or small holes in 1/2", 5/8" or .710" hose. Pack of 15
This 1/4" Double Barbed Straight Connector is for use with a 1/4" hose only and for water pressure up to 50 PSI. Pack of 10.